Euchner CES-A-C5E-01 077750

• Safety switch with integrated evaluation electronics
• Possible to switch pulsed signals
• 2 safety outputs (semiconductor outputs)
• Category 3/PL e according to EN ISO 13849-1
• Unicode

Approach directionCan be adjusted in 90° steps Each actuator is unique. The switch detects only taught-in actuators. Additional actuators can be taught in. Category according to EN ISO 13849-1Due to two redundantly designed semiconductor outputs (safety outputs) with internal monitoring suitable for:

• Category 3/PL e according to EN ISO 13849-1

LED indicator

STATE	Status LED
OUT/ERROR	Safety outputs status / diagnostics LED (combined)

Additional connection

OUT	Monitoring output (semiconductor)

Typical operating distancesAttention:The operating distance may vary depending on the background material and installation situation. (Only in combination with actuator CES-A-BBA, CES-A-BCA) Typical operating distance For a side approach direction for the actuator and safety switch, a minimum distance of s = 4 mm must be maintained so that the operating distance of the side lobes is not entered. (Only in combination with actuator CES-A-BPA) Typical operating distance For a side approach direction for the actuator and safety switch, a minimum distance of s = 6 mm must be maintained so that the operating distance of the side lobes is not entered.

Dimensions	According to EN 60947-5-2: (LxWxH) 131x40x40
Housing material	Plastic, PBT
Weight
Net	0,4 kg
Ambient temperature
At UB = 24 V DC	-20 ... 55 °C
Degree of protection	IP67
Mounting distance
Between 2 switches or 2 actuators	min.80 mm
Installation orientation	Any
Tightening torque
Screws fastening bracket read head	max.0,6 Nm
Fixing screws housing	max.1 Nm
Ready delay	max.3 s
Reaction time
After change in the actuation status	max.180 ms
Switching frequency	max.1 Hz
Dwell time	min.0,5 s
Connection	M12 plug connector, 8-pin, screen can be applied

Electrical connection ratings

Operating voltage DC	18 ... 24 ... 27 V DC Regulated, residual ripple < 5 %
Current consumption	80 mA
Fusing
(External) operating voltage	0,25 ... 8 A
Rated insulation voltage Ui	300 V
Rated impulse withstand voltage Uimp	max.1,5 kV
EMC protection requirements	In acc. with EN 60947-5-3
Degree of contamination (external, according to EN 60947-1)	3
	Safety outputs LA / LB
Type of output	Semiconductor outputs, p-switching, short circuit-proof, electrically decoupled
Output voltage
HIGH U(LB)	U(+LB) - 1,5 ... U(+LB) V DC
LOW U(LA) / U(LB)	0 ... 1 V DC
HIGH U(LA)	U(+LA) - 1,5 ... U(+LA) V DC
Output current
per safety output	1 ... 400 mA
Fusing
External, safety circuit U(+LA) / U(+LB)	0.4 A medium slow-blow
Utilization category according to EN 60947-5-2
DC-13	24V 400mA
Switching load
According to UL	max. DC 24 V, class 2
Rated conditional short-circuit current	max.100 A
Discrepancy time
(Between the operating points of both safety outputs)	max.120 ms
Power supply output load
U(+LA) / U(+LB)	24 V DC 18 ... 27 V DC
	Monitoring output OUT
Type of output	Semiconductor output, p-switching, short circuit-proof
Output voltage	0,8 x UB ... UB V DC
Output current	max.20 mA
	STATE LED
LED indicator	Status LED
	LED OUT / ERROR
LED indicator	Safety outputs status / diagnostics LED (combined)

Work area

Repeat accuracy R

max.10 %

Other

For the approval according to UL the following applies

Operation only with UL class 2 power supply, or equivalent measures

Reliability values according to EN ISO 13849-1

	Monitoring of the safety guard position
Category	3
Performance Level	PL e
PFHD	4.29 x 10-8
Diagnostic Coverage (DC)	90 %
Mission time	20 y

In combination with Actuator CES-A-BBA, CES-A-BCAOperating distance

Distance s, actuator
Minimum distance for side approach direction	min.4 mm
Switch-on distance
With center offset m=0	20 mm
Assured switch-off distance Sar	max.40 mm
Assured operating distance Sao
With center offset m=0	min.18 mm
Switching hysteresis	min.2 mm

In combination with Actuator CES-A-BPAOperating distance

Distance s, actuator
Minimum distance for side approach direction	min.6 mm
Switch-on distance
With center offset m=0	22 mm
Assured switch-off distance Sar	max.58 mm
Assured operating distance Sao
With center offset m=0	min.15 mm
Switching hysteresis	min.1 mm

In combination with Actuator CES-A-BDA-20Operating distance

Distance s, actuator
Minimum distance for side approach direction	min.5 mm
Switch-on distance
With center offset m=0	21 mm
Assured switch-off distance Sar	max.41 mm
Assured operating distance Sao
With center offset m=0	min.19 mm
Switching hysteresis	min.2 mm

Discover the quality of Euchner 077750

At Euchner we are proud of our wide range of industrial parts and equipment. They have been designed to meet the most diverse needs of our customers. Thanks to our representation resseller FAMAGA in India our Euchner we are your reliable partner.

We provide a large selection of top-notch industrial parts, gear, and apparatus. We promise that you will find a great solution to your difficulties, no matter what field you operate in—manufacturing, construction, or anything else.

Exploring the Euchner Catalogue

Our dedication to quality is demonstrated by our Euchner catalogue. We provide a wide range of high-quality industrial components suitable for different applications. Whether you work in manufacturing, construction, or any other industry, our broad selection of products ensures that you will find the perfect solution for your particular needs.

Unparalleled Selection and Expertise

At Euchner, we are dedicated to assisting you in selecting the right industrial parts and equipment. Our team of specialists can offer insightful advice to ensure that your selection precisely meets your needs. They are knowledgeable about the Euchner range of products that we offer. We are here to ensure a simple and easy shopping transaction for you.

FAMAGA India - Your Trusted Euchner Reseller

As a Euchner reseller, we understand the value of both quality and efficiency. We source our products from the most reputable manufacturers and maintain a Euchner warehouse with ready-to-ship stock to expedite your order processing. Our webshop is designed with your convenience in mind, offering a seamless shopping experience.

Why Choose FAMAGA India As Reseller Euchner?

• Products Euchner in India presence: our strong presence in India means that we can serve the local market with speed and efficiency.
• Reliable reseller: we take our role as a Euchner reseller seriously, providing top-notch products to our customers.
• Extensive warehouse: our state-of-the-art warehouse ensures that we have the parts you need readily available.
• User-friendly webshop: our Euchner webshop is designed for your ease of use, allowing you to shop with confidence.
• Diverse range: explore our diverse Euchner range to find the perfect fit for your industrial needs.

When it comes to industrial parts and equipment, FAMAGA India is your good choice. Browse our catalogue, make selections with confidence, and experience top-notch customer service from the moment you visit our webshop. Welcome to a world of quality and reliability, welcome to FAMAGA India.

• Delivery of industrial spares and equipment all over India by Fedex transport company.
• Flexible payment system, acceptance of bank transfers, MasterCard, VISA, PayPall, App Pay, Google Pay.
• Direct from the warehouse and under the order.